Command Start CS-580i FM Installationsanleitung PDF herunterladen (Seite 8)

P. 8 Installation Guide

power up the Ignition and Glow-plug circuits and simply

wait for the time-out before starting:

• Connecting the Glow-plug input wire of the System to

Ignition will hold the ignition ON for the maximum

waiting time (18 sec., recommended).

• Keeping the Glow-plug input wire of the System

unconnected will hold the ignition ON for the

minimum waiting time (3 sec., not recommended in

very cold environments).

Connect the Glow-plug wire to the Ignition wire only after

the Tach programming has been completed: connecting the

Glow-plug wire is one of the very last steps in the

installation process.

2-Pin Harness

Wire Colour Function Description

BLUE/

WHITE

(–)

AUX 2

output

This 500 mA negative output can be programmed for one of the

following Options:

1. Constant while the

LOCK and UNLOCK buttons are pressed

simultaneously, + 1 sec. after the buttons are released.

2. Pressing

LOCK and UNLOCK simultaneously toggles the output

ON and OFF with automatic toggle OFF after 30 seconds.

2 YELLOW

(–) Parking

Light output

500 mA negative Parking Light output.

Flashing the Hood Pin Switch

Flashing the Hood Pin switch is a procedure that brings the System into Programming

Mode. Once the System is in Programming Mode, the installer will have up to 20 seconds

to select one of the sub-menus. If the installer fails to select a sub-menu before the 20-

second delay, the System will exit Programming Mode and the installer will have to flash the

Hood Pin switch once more.

Tip: As long as the Hood is up, you may use the Programming Assistance Button instead of

the Hood Pin switch.

Here are the steps which the installer must follow in order to flash the Hood Pin switch:

The Installer … The Module …

1. Press and hold the Hood Pin switch for 4 seconds.

2. Release the Hood Pin switch.

The Parking Lights will turn ON.

3. While the Parking Lights are ON, press down the

Hood Pin switch once more.

4. Release the Hood Pin switch again.

Caution! If you press down and release the Hood

Pin Switch too many times, you will enter

Diagnostic Mode rather than Programming Mode.

The Parking Lights will stay

for 20 seconds

5. You now have 20 seconds to select one of the sub-

menus.

Table 1: Flashing the Hood Pin switch

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 21 22

Kommentare zu diesen Handbüchern

Keine Kommentare

Command Start CS-580i FM Installationsanleitung Seite 8

Kommentare zu diesen Handbüchern